Production
Quarries and factory
Quarries
We extract blocks in four quarries. Our quarries are located in Tallinn (limestone Reval), Orgita (dolomite Orgita),
and on the island of Saaremaa (dolomites Kaarma and Selgase and limestone Gasell).
Production of plates
The production process starts with the preparation of the blocks using a diamond wire saw. Thereafter, the blocks are sawn using powerful Pedrini disc block-cutters.
After that, the thickness of the raw plates is calibrated, and the desired surface treatment is applied (either by polishing or by brushing, using a special line).
The tiles are then cut to the desired length, calibrated in width, and chamfered. At the end of the line, the finished products are packed.
Preparation of blocks with a wire saw
Start of the working process
Sawing plates from a block
Working on a block
Sawing plates from a block of natural stone
Sawing raw-plates from a block
Sawing of plates
Thickness of raw plates is calibrated and then the plates are honed
Honed plates are cut to the required length
Edges of plates are calibrated
Edges are chamfered and the tiles are packed
Production of tiles
Finishing of natural stone tiles
Sawing of workpieces for balusters
Finishing work
Producing special items
Manufacturing of special items
We manufacture complex items from scratch: from a vision (creating a 3D model) or a 3D scan to the final product.
Bas-relief drawing
Making of a bas-relief clay model
Dolomite bas-relief
Bas-relief installed on a façade
See the product catalogue
Overview of the products offered
Contact
Get in touch, together with our professionals and thanks to their years of experience, we will find you the best solution!
Phone
+372 50 199 63
Address
Peterburi tee 94a, 13816 Tallinn, Estonia