Orgita honed

Name: Orgita honed
SKU: 1300
Availability: InStock

77.00 € / M² - 169.00 € / M² (without VAT)

Own quarries, own production!

Dolomite Orgita is a natural stone with a unique pattern that is easy to process. This stone is more than 400 million years old. The color of this dolomite quarried near Märjamaa ranges from yellowish-beige to bluish-grey. The tiles are not sorted by color.

Here you can read more about this valued finishing stone which has been used since the 14^th century.

The thickness of these floor tiles is 10 mm (for 60 × 60 cm tiles 15 mm).

You can also order skirting stones, window sills, and countertops made of the same material.

You can read more about the delivery costs here.

NB! In order to familiarize yourself with the material you can order a 20 x 20 cm sample.

Order a sample here!

Dimensions

Clear

M²

Product specifications
Description

Product specifications

Surface finish	Honed
Thickness	10 mm (for 60 × 60 cm tile 15 mm)
Weight per 1 m2 (thickness 1 cm)	24.2 kg
Weight per 1 m2 (thickness 1.5 cm)	36.3 kg
Calibrated	Yes
Suitable for wet rooms	Yes
Suitable for use on the wall	Yes
Needs to be jointed	Yes
Suitable for outside use	Yes
Dry slip resistance	61.5 (P5/R13 – very low risk of slip)
Wet slip resistance	51.2 (P4/R12 – low risk of slip)
Production standards	EN 12057:2015 and EN 12058:2015
Quarrying location	Orgita quarry, Märjamaa, Estonia (58°55'04.7"N 24°28'25.3"E)
Factory address	Kivitööstuse, Sepa village, 93755, Saaremaa, Estonia (58°20'17.2"N 22°28'39.9"E)

Description

Historically the dolomite from Orgita has been used for exterior finishing and for carved stones (for example in Tallinn’s Dome Church and Tallinn’s St. Nicholas Church). Nowadays it’s also valued as a stone to use in interior decoration.

The slip resistance of honed dolomite Orgita is as follows: 61.5 for dry surface and 51.2 for wet surface. The dry surface value corresponds to rating P5 (R13) and the wet surface value corresponds to P4 (R12). The ratings P5/R13 indicate greatest level of slip resistance and very low risk of slip. The ratings P4/R12 indicate low risk of slip. Tests were performed in the Stone Pole Oy laboratory in Finland.

Technical information

Samples

If you wish to make sure that the stone is suitable, you can order a sample here.

Wastage

You should consider adding 10% for wastage. In case of a more difficult installation, this should be 15%.

Delivery

We will dispatch the order within 3 weeks, starting from making the payment (except for samples, which will be delivered sooner). You can find out more about delivery here.

The delivery costs will be calculated in the cart.

Explanation of falling lengths

In case of falling lengths, the tile’s length and width are determined, but its length will vary:

for the 200 mm tile between 350-600 mm;
for the 300 mm tile between 450-700 mm;
for the 400 mm tile between 450-800 mm.

You can find more information about the falling lengths here.

Care instructions

Natural stone is a relatively delicate and sensitive material and any objects harder than the stone can scratch its surface. The surface of the stone can be cleaned either with pure water or special cleaning agents.

In case of interior use and not very damp rooms, it is recommended to wax the stone. The layer of wax will protect the surface from getting dirty. Here you can get a more detailed overview of caring for natural stone.

QUESTIONS AND ANSWERS

You can find answers to several questions relating to products sold in the online shop in the section “Questions and answers”.